I’ve mentioned before that I have a real problem decorating our mantel. Christmas is generally the exception to this, because if you pile enough greens on a mantel it will look Christmassy. The rest of the year is a challenge though.
While I like the stone mantel, it makes it very hard to set anything on it because it’s always crooked so I end up sticking folded up paper under candlesticks and things to avoid having them look like the leaning tower of Pisa. Also, with all that stone in what is really not that big of a room, the whole thing can be a little overwhelming.
The man (who was our neighbor when we first bought the house) who built our house put in stone walls and fireplaces similar to ours in every house he built. You can often spot his work just by seeing them, so I would never do anything that would compromise the integrity of his work.
So I came up with the idea of a mantel “sleeve,” which is basically just a box missing a side that slides right onto the existing stone mantel.
So here’s the before:
And here’s the fireplace with the new mantel sleeve (in not nearly as nice lighting):
The hold up has been in the finishing, which is always an adventure to me. I love paint. If you paint something you know exactly what it’s going to look like. But you never really know with stain. It’s always a crapshoot. At least it is with me. And as with other stain projects, I probably did a lot of extra steps that I ended up not needing to do.
I’ll run it down quickly for you. We used red oak to build it, only because the lumber options for such long pieces were limited. I think life would have been so much easier had we made it out of maple or beech, but I don’t mind the oak.
What I was really going for was a finish like this blogger did on a table. Unfortunately the instructions on how to get to that finish were a bit lacking so I did my best to interpret them. I also did a LOT of sampling on cut offs from the boards.
1. Sand the whole thing, making especially sure to sand off any glue that might not have been wiped off.
2. Fill the nail holes, cracks, etc. with wood filler. I’m partial to Timbermate, which I have only found at Woodcraft stores so I always order it online. It smells like Band-aids, but it never dries out and you can change the consistency by adding water to it.
3. By this point, I had decided that the grain on my test boards was just getting too dark in my stain samples, so I made a slurry with the Timbermate to use as grain filler. This helps smooth everything out even more, and hopefully would keep that grain from soaking up too much stain.
This was the consistency of the watered-down paint that I applied first. |
This was try No. 1 on the finish. I didn’t care for it. I also changed the bow on the wreath! |
I’m really looking forward to decorating the mantel tonight, all while brainstorming what I’ll do there after the holidays. What do you think? Are you partial to the original mantel or do you like the new twist?